terpmeculis1980.netlify.com

• Aluminium T Slot Plate Holder
• T Slot Aluminium Plates

• T-Slot Fixture Plates These plates have three T-slots for use with T-slot nuts, bolts, and setup studs. There is a slot along each side of the plate for mounting with clamps. Aluminum plates are lightweight and have mild corrosion resistance.
• The PT25 ALuminum Exutrusions table plates have t-slots on one side only. The t-slots are on 25mm centers. They are clear anodized for a clean and durable finish The extrusion is stress relieved and both sides are machined flat.

TSLOTS CATALOG - by Bonnell Aluminum. The T-slot plate is supplied with a smooth, closed bottom; that allows you to suck the plate on a vacuum table. For mounting on a machine table / frame holes will be drilled at a appropriate position. You can do this by yourself or take advantage of our service. Technical Data: made for T-Slot nuts according to DIN508; Tolerance/Precision. Aluminium Extrusion T-Slot Plate 2020 30cm Profile CNC Table 3D Printer: Description: Form a perfect solution for custom machine frames, workstations, prototyping, guarding and many more purposes. The extrusion are a great framing material as they are adjustable and can hold T-Slot Nuts on all 4 Grooved Surface sides. High strength and hardness.

Aluminum Extrusion T Slot Table Plates

We have the largest selection of table plates in the industry.Widths start at 75mm and go up to 600mm.Standard lengths up to 3 meters with custom lengths on some models to 6 meters.Extrusions are available in standard lengths or can be custom cut as required.All extrusions are clear anodized and precision extruded.These table plates are ideal for fixturing, work holding, machine table tops, laser cutting and engraving, etc.

Product Lineup

PT 25 Aluminum Extrusion Table Plate

The PT25 Aluminum extrusion table plates are 20mm thick, wide, solid and machined flat on both sides.

• T-slots on one side only.
• T-slots are on 25mm centers.
• Clear anodized for a clean and durable finish
• The extrusion is stress relieved and both sides are machined flat.
• Comes in 3 widths – 125mm, 250mm and 375mm and can be used to make very flat anf precise work beds, fixture plates, table tops, etc.
• Can be provided cut to custom lengths for OEM quantities
• Can be used as table tops for CUSTOM WORKBENCHES or ROBOT work tables

PT 50 Aluminum Extrusion Table Plate

The PT50 ALuminum Extrusion Table Plate is 20mm thick.
Available in widths of 250mm and 375mm.
Both sides are machined flat.
Available in standard lengths of 250mm to 3000mm in 250mm increments.
Custom cut lengths available for a nominal cut charge.
It can be used for very flat and precise work surfaces for many automation applicaitons .

PR 30 Series Aluminum Extrusion Table Plate

This extra wide series of table plates are 30mm thick and can be used for router table beds and other large format automation equipment.

• They are available in lengths up to 3m as standard in 250mm increments. (special lengths are available for a nominal cut charge)
• Lengths up to 6m can be special ordered
• Available in widths of 150mm, 300mm, 350mm, 450mm, 600mm
• T slots can take up to M8 T nuts.

PR 25 Table Plates

• Widths of 125mm, 250mm, 375mm and 500mm
• Heavy duty solid profile makes it ideal for fixturing
• Hollows on the bottom of the extrusion can be tapped for M5 or M6 threads
• Precision extruded for flatness
• Available in 250mm increment standard lengths up to 3m
• Custom lengths available for cut charge
• Available in lengths up to 6m on custom order

RE40 Aluminum Extrusion Table Plate

Aluminum extrusion table profiles are 40mm thick, clear anodized, light, and very stable.

• Machined flat on both sides
• Available in widths of 150mm, 250mm and 350mm
• Profiles are 40mm thick for rigidity against bending – see Ix and Iy bending moments
• Cavities in profile make it light and extremely stiff against bending.
• Universal precision clamping and machining surface
• Ideal for use as a stabiliser for machine and subframe constructions, fixture plates, work holding etc.

RE65 Aluminum Extrusion Table Plate

Aluminum extrusion table profiles are 65 mm thick, clear anodized, light, and very stable.

• Machined flat on both sides
• Available in widths of 150mm and 250mm
• Profiles are 65 mm thick for rigidity against bending – see Ix and Iy bending moments
• Cavities in profile make it light and extremely stiff against bending.
• Universal precision clamping and machining surface
• Ideal for use as a stabiliser for machine and subframe constructions, fixture plates, work holding etc.
• Available in standard lengths of increments of 250mm
• Custom cut lengths available for nominal cut fee
• A variety of T nuts available- T Nuts Type 1 and T Nuts Type 2
• 5.5mm diam. spaces can be tapped for M6 thread

RE15x75 Aluminum Extrusion Table Plate

This Mini-Table Plate is just 15x75mm with 2 T slots on one side and 1 T slot on the other side.

• Ideal for use as a universal mounting platform or fence guide
• Also suitable for machine tables which use T-slots to hold work pieces and to mount gauging and test fixtures.
• Clear anodized for protection and good looks
• Available in lengths up to 3m
• standard lengths of increments of 250mm
• custom cut to any length needed for a nominal cut charge
• A variety of T nuts available for fixturing and mounting
• Two specially shaped channels, 50mm apart and above the T slots, are available at each end of the extrusion to be used with M4 self-tapping screws or can be tapped with an M4 thread.

Aluminum Extrusion T Slot Table Plates

We have the largest selection of table plates in the industry.Widths start at 75mm and go up to 600mm.Standard lengths up to 3 meters with custom lengths on some models to 6 meters.Extrusions are available in standard lengths or can be custom cut as required.All extrusions are clear anodized and precision extruded.These table plates are ideal for fixturing, work holding, machine table tops, laser cutting and engraving, etc.

Product Lineup

PT 25 Aluminum Extrusion Table Plate

The PT25 Aluminum extrusion table plates are 20mm thick, wide, solid and machined flat on both sides.

• T-slots on one side only.
• T-slots are on 25mm centers.
• Clear anodized for a clean and durable finish
• The extrusion is stress relieved and both sides are machined flat.
• Comes in 3 widths – 125mm, 250mm and 375mm and can be used to make very flat anf precise work beds, fixture plates, table tops, etc.
• Can be provided cut to custom lengths for OEM quantities
• Can be used as table tops for CUSTOM WORKBENCHES or ROBOT work tables

PT 50 Aluminum Extrusion Table Plate

The PT50 ALuminum Extrusion Table Plate is 20mm thick.
Available in widths of 250mm and 375mm.
Both sides are machined flat.
Available in standard lengths of 250mm to 3000mm in 250mm increments.
Custom cut lengths available for a nominal cut charge.
It can be used for very flat and precise work surfaces for many automation applicaitons .

PR 30 Series Aluminum Extrusion Table Plate

This extra wide series of table plates are 30mm thick and can be used for router table beds and other large format automation equipment.

• They are available in lengths up to 3m as standard in 250mm increments. (special lengths are available for a nominal cut charge)
• Lengths up to 6m can be special ordered
• Available in widths of 150mm, 300mm, 350mm, 450mm, 600mm
• T slots can take up to M8 T nuts.

PR 25 Table Plates

• Widths of 125mm, 250mm, 375mm and 500mm
• Heavy duty solid profile makes it ideal for fixturing
• Hollows on the bottom of the extrusion can be tapped for M5 or M6 threads
• Precision extruded for flatness
• Available in 250mm increment standard lengths up to 3m
• Custom lengths available for cut charge
• Available in lengths up to 6m on custom order

RE40 Aluminum Extrusion Table Plate

Aluminium T Slot Plate Holder

Aluminum extrusion table profiles are 40mm thick, clear anodized, light, and very stable.

• Machined flat on both sides
• Available in widths of 150mm, 250mm and 350mm
• Profiles are 40mm thick for rigidity against bending – see Ix and Iy bending moments
• Cavities in profile make it light and extremely stiff against bending.
• Universal precision clamping and machining surface
• Ideal for use as a stabiliser for machine and subframe constructions, fixture plates, work holding etc.

RE65 Aluminum Extrusion Table Plate

Aluminum extrusion table profiles are 65 mm thick, clear anodized, light, and very stable.

• Machined flat on both sides
• Available in widths of 150mm and 250mm
• Profiles are 65 mm thick for rigidity against bending – see Ix and Iy bending moments
• Cavities in profile make it light and extremely stiff against bending.
• Universal precision clamping and machining surface
• Ideal for use as a stabiliser for machine and subframe constructions, fixture plates, work holding etc.
• Available in standard lengths of increments of 250mm
• Custom cut lengths available for nominal cut fee
• A variety of T nuts available- T Nuts Type 1 and T Nuts Type 2
• 5.5mm diam. spaces can be tapped for M6 thread

RE15x75 Aluminum Extrusion Table Plate

This Mini-Table Plate is just 15x75mm with 2 T slots on one side and 1 T slot on the other side.

T Slot Aluminium Plates

• Ideal for use as a universal mounting platform or fence guide
• Also suitable for machine tables which use T-slots to hold work pieces and to mount gauging and test fixtures.
• Clear anodized for protection and good looks
• Available in lengths up to 3m
• standard lengths of increments of 250mm
• custom cut to any length needed for a nominal cut charge
• A variety of T nuts available for fixturing and mounting
• Two specially shaped channels, 50mm apart and above the T slots, are available at each end of the extrusion to be used with M4 self-tapping screws or can be tapped with an M4 thread.